- featureHand shower Included
- cold and hot water switchYes
- installation typeShower System
- installation holesThree Holes
- number of handlesSingle Handle
- finishPolished Brass
- height51.1 inch (130 cm)
- faucet spout includedyes
- showerhead width7.8 inch (20 cm)
- top shower materialA Grade ABS Plastic
- hand shower materialA Grade ABS Plastic
- installation height35.4-47.2 inch (90-120 cm)
- shower hose length59 inch (150 cm)
you may also like
How To Install
the height 'H' is according to your actual conditions
B.top of faucet
C. seal ring C washer
The installation process refers to requirements of actual product installation.
A.Part of shower rod
B.Part of shower rod
C.part of switching valve
B.joint of switching valve
A:Divided by function: bathtub faucets, shower faucets, bathroom sink faucets, kitchen sink faucet.
Divided to open methods: wrench faucets, spiral faucets, lift faucets, push faucets, touchless faucets.
Divided by material: iron-carbon alloys faucets, copper faucets, PVC material faucets, zinc alloy faucets, ceramic faucets, stainless steel faucets and other materials faucets.
Divided by structure: single-joint type, duplex and triplex like.
Divided by spool: ceramic valve, stainless steel valve, copper valve.
A:Usually toilet cover used plastic, acrylic, urea cover, wood, bamboo and stone.
NOTE: we will resend you new replacement if the parcel damage or not receive ,But pls feedback the this information to lacal courier copmay which do delivery to you ,and do ask them to record and reply. it is the first important step to ask for claim online and then pls email us with pictures of broken packing. if local post office didn't do record ,we can't resend new replacement or refund
SF local number: 001 855 901 1133 (US)
UPS local number:18007827892(US)
DHL local number:1-800-225-5345 (US)/1-954-888 7000
A:There are two screws underneath the toilet cover, unscrew them.
A:The water basin seat is not sealed, you need to inject putty or silicone to the seat bottom ring.
A:There are too many Impurities in the water to affect the bubbler work. Unscrew the bubbler then soaked and cleaned with vinegar, then replace to the faucet.
A:It is because of low water pressure, you need to disassemble the leading to exchange bubbler of faucets.
A:It is because of Improper installation or rubber ring deformation, you need to replace the rubber ring and reinstall it.
A:Remove the valve body, remove the foreign body, installed after the spool as necessary to replace the valve leakage.
A:Leading pure copper material does not appear water printed!
A:undermount basin is bettern for it is beautiful and easy to clean. Bathroom sink faucet to match undermount basin need to consider the thickness of the edge of the basin and choose a long spout faucet.
A:The best choice for kitchen faucets is long-handled kitchen faucet, because it has long arm so the switch is easier, and in the hands of cooking time often have oil, detergent and other liquid, even sometimes holding bowl to be washed so that it is more convenient to switch faucet with back of the hand or wrist long handle.
A:No, touchless faucets can have hot water and can adjust the water temperature as you like.
A:All products on savingfaucet are free shipping to United States. Some products are complicated, so we need to adjust for customer. Generally speaking, the delivery time is 5-15 days. For more information, please feel free to contact our customer service: 1(347) 688 7991.
A:We support exchange or return in 3 days (once you received the goods which depends on delivery and sing in date). If there are problems about the goods which are due to us, please contact us. If you did not contact our customer service but directly return the goods back to us, our company will refuse the parcel. Therefore, in case unnecessary problem happens, please contact our customer service first
A:Yes, of course. You can fill in your contact information and request on our wholesale page. We will contact you on time and send you the samples. And also you can give a call at our customer service. We will be happy to help you.
A:After you placed the order on savingfaucet.com, our customer service will send you an email including the detailed information about your order like shipping address, and your item information. So if there is any problem or mistake you can contact us and we will correct for you. Also, when we shipped your order, we will send you the email with tracking number, so you can check online. We will keep your privacy and will not sell or reveal your information to others.
A:We accept Visa, Master Card, Paypal, Western Union and Bank Transfer.
A:savingfaucet Quality Assurance Program is a vital part of our corporate policy and store operations and is fully supported by senior management. Our organization is committed to an effective product safety program that ensures that our stores and products meet established standards for safety, quality and value. savingfaucet offers quality products that meet or exceed product requirements established by applicable government agencies and our Quality Assurance department. Suppliers and products are evaluated for compliance with company standards and regulatory requirements through vendor audits and product inspections on an ongoing basis. The Quality Assurance department investigates customer concerns and initiates the appropriate follow-up and response action. If you have any questions, or to send us a comment, email us.
A:savingfaucet proudly stands behind the products we sell. savingfaucet One-Year Warranty states that we will repair or, at our option, replace at no charge, your purchase within one year of the purchase date should you discover any defect in materials or workmanship. This warranty does not cover defects, including breakage or malfunctions, caused by your mishandling or use of the product in ways other than specified by the manufacturer.
A:The reason is that we run our own factory. With all the middle dealers being left out of the business, it takes you less money to purchase the same item than it does on any other online sites. We are and always will be dedicated to providing latest fashion and newest design with high quality and low price.
In general, for 2 holes or above, standard distance of 2 pipe center should be 150mm, and had better at the same horizontal line.
If the distance is above or under 150mm, pls purchase the faucet adapter to adjust
> Comes with all necessary accessories for installation.
> Featured with durable ceramic valves ensuring there are no water leaks.
> Available to work more than 600,000 times at a water temperature of 90 degrees.
> High quality material and finishing tested at a high water pressure of 1.6Mpa.
If your faucet is not G1/2'', please contact with our customer service, we will provide thread adapter of appropriate size for you.
The shower faucets looks like an art crafts. It has shiny polished brass finish which could could resistance to rust and corrosion. It used brass material as its raw material which is firm and solid for using. PB free material is environmental for your family.
Polished Brass Shower Faucets USD$330.99,save 40%off.
It used gravity crafts design which could make the faucet smooth and enduring. It also has marble hand held shower which is anti-scald. The ABS plastic material water holes is self-cleaning. It has top shower head, a hand held shower, faucet spout and stick handle.
8 Inch top shower head has superior quality of silicone material water holes. It is easy to clean and convenient for using. The pressurized function could provide comfortable and enough water for you. It also has bell shape which is vintage and decorative.
It has faucet spout included. It has a stick marble handle controls hot and cold water. It also has three shifts switch controls output water type. And the rotatable faucet spout is convenient for using. Inside of the spout, it has ceramic spool which is anti-high temperature and high pressure.
There are no questions yet.Ask a question